Rohde & Schwarz FSW Series, User Manual

Page: 330 / 371

Remote Commands for Analog Demodulation Measurements
R&S
®
FSW-K7
330 User Manual 1173.9240.02 ─ 17
Return values:
<LimitLines> String containing the names of all active limit lines in alphabeti-
cal order.
Example: CALC:LIM:ACT?
Queries the names of all active limit lines.
Usage: Query only
Manual operation: See "Visibility" on page 149
CALCulate:LIMit<k>:COPY <Line>
This command copies a limit line.
Parameters:
<Line> 1 to 8
number of the new limit line
<name>
String containing the name of the limit line.
Example: CALC:LIM1:COPY 2
Copies limit line 1 to line 2.
CALC:LIM1:COPY 'FM2'
Copies limit line 1 to a new line named FM2.
Manual operation: See "Copy Line" on page 150
CALCulate:LIMit<k>:DELete
This command deletes a limit line.
Usage: Event
Manual operation: See "Delete Line" on page 150
CALCulate:LIMit<k>:STATe <State>
This command turns the limit check for a specific limit line on and off.
To query the limit check result, use
CALCulate:
​
LIMit<k>:
​
FAIL?
​
.
Note that a new command exists to activate the limit check and define the trace to be
checked in one step (see
CALCulate:
​
LIMit<k>:
​
TRACe<t>:
​
CHECk
​
on page 331).
Parameters:
<State> ON | OFF
*RST:
OFF
Example: CALC:LIM:STAT ON
Switches on the limit check for limit line 1.
Usage: SCPI confirmed
Manual operation: See "Disable All Lines" on page 150
Analyzing Results