Rohde & Schwarz FSW Series, User Manual

Page: 157 / 371

I/Q Data Import and Export
R&S
®
FSW-K7
157 User Manual 1173.9240.02 ─ 17
└ Export Trace to ASCII File ............................................................................ 157
└ Trace Export Configuration ........................................................................... 157
└ I/Q Export ......................................................................................................157
Import
Provides functions to import data.
I/Q Import ← Import
Opens a file selection dialog box to select an import file that contains IQ data. This
function is only available in single sweep mode and only in applications that process
I/Q data, such as the I/Q Analyzer or optional applications.
Note that the I/Q data must have a specific format as described in the R&S FSW I/Q
Analyzer and I/Q Input User Manual.
I/Q import is not available in MSRA/MSRT mode.
Remote command:
MMEMory:
​
LOAD:
​
IQ:
​
STATe
​
on page 340
Export
Opens a submenu to configure data export.
Export Trace to ASCII File ← Export
Opens a file selection dialog box and saves the selected trace in ASCII format (
.dat
)
to the specified file and directory.
The results are output in the same order as they are displayed on the screen: window
by window, trace by trace, and table row by table row.
For details on the file format see chapter 11.7.5, "Reference: ASCII File Export For-
mat" , on page 297.
Note: Secure user mode.
In secure user mode, settings that are to be stored on the instrument are stored to vol-
atile memory, which is restricted to 256
MB. Thus, a "Memory full" error may occur
although the hard disk indicates that storage space is still available.
To store data permanently, select an external storage location such as a USB memory
device.
For details see "Protecting Data Using the Secure User Mode" in the "Data Manage-
ment" section of the R&S
FSW User Manual.
Remote command:
MMEMory:
​
STORe<n>:
​
TRACe
​
on page 292
Trace Export Configuration ← Export
Opens the "Traces" dialog box to configure the trace and data export settings. See
chapter 6.2, "Trace / Data Export Configuration" , on page 133.
I/Q Export ← Export
Opens a file selection dialog box to select an export file to which the IQ data will be
stored. This function is only available in single sweep mode, and only in applications
that process I/Q data, such as the I/Q Analyzer or optional applications.
Import/Export Functions