manualshive.com logo in svg

Rohde & Schwarz FSW Series, User Manual

Share
Download
Rohde & Schwarz FSW Series User Manual Download Page 292

Remote Commands for Analog Demodulation Measurements

R&S

®

FSW-K7

292

User Manual 1173.9240.02 ─ 17

Usage: 

SCPI confirmed

11.7.2 Exporting Trace Results

Trace results can be exported to a file.

For more commands concerning data and results storage see the R&S

 

FSW User

Manual.

MMEMory:STORe<n>:TRACe

.........................................................................................292

FORMat:DEXPort:DSEParator

........................................................................................ 292

FORMat:DEXPort:HEADer

..............................................................................................293

FORMat:DEXPort:TRACes

............................................................................................. 293

MMEMory:STORe<n>:TRACe 

<Trace>, <FileName>

This command exports trace data from the specified window to an ASCII file.

Secure User Mode

In secure user mode, settings that are to be stored on the instrument are stored to vol-
atile memory, which is restricted to 256

 

MB. Thus, a "Memory full" error may occur

although the hard disk indicates that storage space is still available.

To store data permanently, select an external storage location such as a USB memory
device.

For details see "Protecting Data Using the Secure User Mode" in the "Data Manage-
ment" section of the R&S

 

FSW User Manual.

Parameters:

<Trace>

Number of the trace to be stored
(This parameter is ignored if the option "Export all Traces and all
Table Results" is activated in the Export configuration settings,
see 

FORMat:

​

DEXPort:

​

TRACes

​

 

on page 293).

<FileName>

String containing the path and name of the target file.

Example: 

MMEM:STOR1:TRAC 3,'C:\TEST.ASC'

Stores trace 3 from window 1 in the file 

TEST.ASC

.

Usage: 

SCPI confirmed

Manual operation:

See 

"Export Trace to ASCII File"

 

on page 134

FORMat:DEXPort:DSEParator 

<Separator>

This command selects the decimal separator for data exported in ASCII format.

 

Retrieving Results

Summary of Contents for FSW Series




















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands