manualshive.com logo in svg

Rohde & Schwarz FSW Series, User Manual

Share
Download
Rohde & Schwarz FSW Series User Manual Download Page 69

Configuration

R&S

®

FSW-K7

69

User Manual 1173.9240.02 ─ 17

5.4.1.3

Digital I/Q Input Settings

The following settings and functions are available to provide input via the Digital Base-
band Interface (R&S

 

FSW-B17) in the applications that support it.

They can be configured via the INPUT/OUTPUT key, in the "Input" dialog box.

For more information see the R&S

 

FSW I/Q Analyzer and I/Q Input User Manual.

Digital I/Q Input State

.................................................................................................... 69

Input Sample Rate

........................................................................................................ 69

Full Scale Level

.............................................................................................................70

Adjust Reference Level to Full Scale Level

...................................................................70

Connected Instrument

...................................................................................................70

DigIConf

........................................................................................................................ 70

Digital I/Q Input State

Enables or disable the use of the "Digital IQ" input source for measurements. "Digital
IQ" is only available if the Digital Baseband Interface (R&S

 

FSW-B17) is installed.

Remote command: 

INPut:

​

SELect

​

 

on page 184

Input Sample Rate

Defines the sample rate of the digital I/Q signal source. This sample rate must corre-
spond with the sample rate provided by the connected device, e.g. a generator.

If "Auto" is selected, the sample rate is adjusted automatically by the connected
device.

 

Input and Frontend Settings

Summary of Contents for FSW Series




















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands