manualshive.com logo in svg

Rohde & Schwarz FSW Series, User Manual

Share
Download
Rohde & Schwarz FSW Series User Manual Download Page 179

Remote Commands for Analog Demodulation Measurements

R&S

®

FSW-K7

179

User Manual 1173.9240.02 ─ 17

Application

<ChannelType> Parameter

Default Channel Name*)

1xEV-DO BTS (R&S

 

FSW-

K84)

BDO

1xEV-DO BTS

1xEV-DO MS (R&S

 

FSW-

K85)

MDO

1xEV-DO MS

WLAN (R&S

 

FSW-K91)

WLAN

WLAN

LTE (R&S

 

FSW-K10x)

LTE

LTE

Realtime Spectrum
(R&S

 

FSW-K160R)

RTIM

Realtime Spectrum

Note: the default channel name is also listed in the table. If the specified name for a new channel already
exists, the default name, extended by a sequential number, is used for the new channel.

INSTrument:REName 

<ChannelName1>, <ChannelName2>

This command renames a measurement channel.

Parameters:

<ChannelName1>

String containing the name of the channel you want to rename.

<ChannelName2>

String containing the new channel name.
Note that you can not assign an existing channel name to a new
channel; this will cause an error.

Example: 

INST:REN 'Spectrum2','Spectrum3'

Renames the channel with the name 'Spectrum2' to 'Spectrum3'.

INSTrument[:SELect] 

<ChannelType>

Selects the channel type for the current channel.

See also 

INSTrument:

​

CREate[:

​

NEW]

​

 

on page 176.

For a list of available channel types see 

table 11-1

.

Parameters:

<ChannelType>

ADEMod

Analog Demodulation application, R&S

 

FSW–K7

SYSTem:PRESet:CHANnel[:EXECute]

This command restores the default instrument settings in the current channel.

Use 

INST:SEL

 to select the channel.

Example: 

INST 'Spectrum2'

Selects the channel for "Spectrum2".

SYST:PRES:CHAN:EXEC

Restores the factory default settings to the "Spectrum2" channel.

Usage: 

Event

Activating Analog Demodulation Measurements

Summary of Contents for FSW Series




















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands