Rohde & Schwarz 1321.0615.02, User Manual

Page: 474 / 581

Remote Commands
R&S
®
Spectrum Rider FPH
467 User Manual 1321.1011.02 ─ 11
These commands are independent from the operating mode.
List of commands
SYSTem:CAPTure:COUNter
........................................................................................... 467
SYSTem:CAPTure:CSV[:STATe]
...................................................................................... 467
SYSTem:CAPTure:DATaset[:STATe]
.................................................................................467
SYSTem:CAPTure:GPX[:STATe]
......................................................................................467
SYSTem:CAPTure:MODE
...............................................................................................468
SYSTem:CAPTure:SCReen[:STATe]
................................................................................ 468
SYSTem:CAPTure:COUNter <CaptureCounter>
This command defines the start of the filename counter.
The counter numbers the files stored when you capture data (screenshots, datasets
etc.).
Parameters:
<CaptureCounter> String containing the number with which to start numbering files.
*RST:
'0000'
Example: SYST:CAPT:COUN '0100'
Starts numbering files with 0100, e.g. Measurement0100.png.
SYSTem:CAPTure:CSV[:STATe] <State>
This command enables or disables the CSV export function.
Parameters:
<State>
Example: SYST:CAPT:CSV 1
Enables the CSV export function.
SYSTem:CAPTure:DATaset[:STATe] <State>
This command includes or excludes datasets from the data capture.
Parameters:
<State> ON | OFF
*RST:
OFF
Example: SYST:CAPT:DAT ON
Includes datasets into the data capture.
SYSTem:CAPTure:GPX[:STATe] <State>
This command includes or excludes GPX information from the data capture.
Remote Control - Commands
www.allice.de Allice Messtechnik GmbH