Rohde & Schwarz 1321.0615.02, User Manual

Page: 473 / 581

Remote Commands
R&S
®
Spectrum Rider FPH
466 User Manual 1321.1011.02 ─ 11
Usage: Setting only
HCOPy:DEVice:LANGuage <Format>
This command selects the file format for screenshots.
Parameters:
<Format> PNG | JPG
Example: HCOP:DEV:LANG PNG
Selects the png format for screenshots.
HCOPy[:IMMediate]
This command makes a screenshot of the current display content in png format and
stores it on the R&S Spectrum Rider internal memory.
You can select a filename for the screenshot in png format with
MMEMory:NAME
on page 466 and select the file format of the screenshot with
HCOPy:DEVice:
LANGuage
on page 466.
To make a screenshot in jpg format, use
DISPlay<1...2>[:WINDow]:STORe
on page 465.
This command is an event and therefore has no *RST value and no query.
Example: HCOP:DEV:LANG PNG
MMEM:NAME '\Public\Screen Shots\Test.png'
HCOP
Makes and stores a screenshot of the current screen in a file
'Test.png'.
Usage: Event
MMEMory:NAME <FileName>
This command defines the path and filename that the R&S Spectrum Rider uses for
storing screenshots (see
HCOPy[:IMMediate]
on page 466). The path and filename
comply with DOS conventions.
This command is an event and therefore has no *RST value and no query.
Parameters:
<FileName> String containing the filename.
Example: MMEM:NAME 'Public\Screeshots\Test.png'
Stores the screenshot in the corresponding directory on the R&S
Spectrum Rider.
13.6.9 Configuring Data Capture
The following commands configure the data capture.
Remote Control - Commands
www.allice.de Allice Messtechnik GmbH