Rohde & Schwarz 1321.0615.02, User Manual

Page: 465 / 581

Remote Commands
R&S
®
Spectrum Rider FPH
458 User Manual 1321.1011.02 ─ 11
You can query the result of the limit check with
CALCulate<1...2>:
LIMit<1...2>:FAIL?
on page 356.
The numeric suffix at CALCulate is irrelevant for this command. The numeric suffix at
LIMit selects the limit line.
Parameters:
<State> ON | OFF
*RST:
OFF
Example: CALC:LIM1:STAT ON
Switches on the limit check for limit line 1.
CALCulate<1...2>:LIMit<1...2>:UNIT:X?
This command queries the horizontal unit of a limit line.
This command is a query and therefore has no *RST value.
The numeric suffix at CALCulate is irrelevant for this command. The numeric suffix at
LIMit selects the limit line.
Suffix:
<1...2>
.
1...2
<1...2> 1...2
Example: CALC:LIM1:UNIT:X?
Queries the x-unit of the first limit line.
Usage: Query only
CALCulate<1...2>:LIMit<1...2>:UNIT[:Y]?
This command queries the vertical unit of a limit line.
This command is a query and therefore has no *RST value.
The numeric suffix at CALCulate is irrelevant for this command. The numeric suffix at
LIMit selects the limit line.
Suffix:
<1...2>
.
1...2
<1...2> 1...2
Example: CALC:LIM1:UNIT?
Queries the y-unit of the first limit line.
Usage: Query only
CALCulate<1...2>:LIMit<1...2>:UPPer:SELect <LimitLine>
This command selects the upper limit line.
This command is an event and therefore has no *RST value and no query.
Remote Control - Commands
www.allice.de Allice Messtechnik GmbH