Remote Commands
R&S
®
Spectrum Rider FPH
478
User Manual 1321.1011.02 ─ 11
Parameters:
<Submask>
String containing the subnet mask ('x.x.x.x').
*RST:
255.255.255.0
Example:
SYST:COMM:LAN:SUBM '255.255.255.0'
Sets the subnet mask address to 255.255.255.0.
SYSTem:COMMunicate:SOCKet:ADDRess
<IPAddress>
This command sets the IP address of the R&S Spectrum Rider.
Parameters:
<IPAddress>
String containing the IP address ('x.x.x.x').
*RST:
172.76.68.24
Example:
SYST:COMM:SOCK:ADDR '172.76.68.30'
Sets the IP address of the R&S Spectrum Rider to 172.76.68.30.
SYSTem:COMMunicate:SOCKet:DHCP[:STATe]
<State>
This command turns the Dynamic Host Configuration Protocol (DHCP) on and off.
Parameters:
<State>
ON | OFF
*RST:
ON
Example:
SYST:COMM:SOCK:DHCP ON
Activates DHCP.
SYSTem:COMMunicate:SOCKet:PORT
<Port>
This command sets the port number for the connection.
Parameters:
<Port>
Port number.
*RST:
5555
Example:
SYST:COMM:SOCK:PORT 1000
Sets the port number to 1000.
13.6.11.6
System Settings
This chapter describes all commands that define or query general system settings.
List of commands
........................................................................................ 479
.............................................................................................480
Remote Control - Commands
www.allice.de
Allice Messtechnik GmbH
