manualshive.com logo in svg

Rohde & Schwarz 1321.0615.02, User Manual

Share
Download
Rohde & Schwarz 1321.0615.02 User Manual Download Page 157

Spectrum Analyzer Mode

R&S

®

Spectrum Rider FPH

150

User Manual 1321.1011.02 ─ 11

6.1.7.4

 

Using a Trigger

For more information on using external trigger to trigger measurements, see 

"External

trigger"

 

on page 135.

6.1.8

 

Measuring the AM Modulation Depth

The AM Modulation Depth measurement analyzes AM modulated signals and calcu-
lates the modulation depth of the signal using the measurement results. Note that the
measurement works properly only if you apply an AM modulated signal.

1. Press [MEAS] key.

2. Select "Meas Mode" softkey.

The R&S Spectrum Rider opens a submenu to select the measurement mode.

3. Select the "AM Modulation Depth"" menu item.

The R&S Spectrum Rider starts to measure the AM modulation depth.

After you have started the measurement, the R&S Spectrum Rider places three mark-
ers on the trace. The first marker is placed on the peak power level. The R&S Spec-
trum Rider assumes that position as the level of the carrier. The second and third
markers are delta markers. These are placed symmetrically on the adjacent peak val-
ues to the left and right of the carrier.

Figure 6-7: Screen layout for the AM modulation depth measurement

1 = AM modulation depth measurement mode
2 =

Measurement Result View

3 = Modulation depth
4 =

Parameter view

5 =

Configuration overview

Performing Spectrum Measurements

www.allice.de

Allice Messtechnik GmbH

Summary of Contents for 1321.0615.02






































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands