manualshive.com logo in svg

Rohde & Schwarz 1321.0615.02, User Manual

Share
Download
Rohde & Schwarz 1321.0615.02 User Manual Download Page 42

Getting Started

R&S

®

Spectrum Rider FPH

35

User Manual 1321.1011.02 ─ 11

3.2.2.5

 

DC Port

The DC port is located behind a protective cap on the left side of the R&S Spectrum
Rider.

The R&S Spectrum Rider is supplied with power by the AC/DC transformer power sup-
ply via the DC connector. You can also use the DC connector to charge the battery.

3.2.2.6

 

Mechanical Locking Device

The Kensington lock is located behind a protective cap on the left side of the R&S
Spectrum Rider.

A Kensington lock can be anchored to the R&S Spectrum Rider housing to secure it to
a workstation mechanically.

3.2.2.7

 

Mini USB and LAN Port

The mini USB and LAN ports are located behind a protective cap on the right side of
the R&S Spectrum Rider.

Instrument Tour

www.allice.de

Allice Messtechnik GmbH

Summary of Contents for 1321.0615.02






































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands