Spectrum Analyzer Mode
R&S
®
Spectrum Rider FPH
143
User Manual 1321.1011.02 ─ 11
4. Enter the number of transmission channels you need for the measurement.
Setting the number of adjacent channels
1. Select "Channel Settings" softkey.
The R&S Spectrum Rider opens a submenu to select the channel settings.
2. Select the "Adj Channels" menu item.
The R&S Spectrum Rider opens an input field to define the number of adjacent
channels.
3. Enter the number of adjacent / alternate channels you need for the measurement.
The borders of Tx channels are displayed red in the trace diagram, the borders of
adjacent and alternate channels are displayed green.
Setting the channel bandwidth
The channel bandwidth specifies the frequency range around the center frequency,
over which the R&S Spectrum Rider performs the power measurement.
1. Press [MEAS] key.
2. Select "Channel BW" softkey.
The R&S Spectrum Rider opens a dialog box to specify the channel bandwidth for
all channels.
3. Select the desired channel input field to change the bandwidth setting.
4. Enter the channel bandwidth you need.
Performing Spectrum Measurements
www.allice.de
Allice Messtechnik GmbH
