Rohde & Schwarz 1321.0615.02, User Manual

Page: 423 / 581

Remote Commands
R&S
®
Spectrum Rider FPH
416 User Manual 1321.1011.02 ─ 11
Parameters:
<Alpha> Range: 0 to 1
*RST: 1
Example:
DDEM:FILT:ALPH 0.35
Define roll-off factor.
[SENSe:]DDEMod:FILTer:NAME <FilterName>
This command selects the measurement filter.
If you want to use no filter (unfiltered measurements), see
[SENSe:]DDEMod:
FILTer[:STATe]
on page 416.
Parameters:
<FilterName> RRC | RC | GAUS
RRC
Selects a root raised cosine filter.
RC
Select a raised cosine filter.
GAUS
Select a Gaussian filter.
Example: DDEM:FILT:NAME RRC
Select RRC filter.
[SENSe:]DDEMod:FILTer[:STATe] <State>
This command turns the measurement filter on and off.
Parameters:
<State> OFF | 0
Turns off the measurement filter for unfiltered measurements.
ON | 1
Turns on the measurement filter selected with
[SENSe:
]DDEMod:FILTer:NAME
on page 416.
[SENSe:]DDEMod:SRATe <SymbolRate>
This command defines the symbol rate.
Parameters:
<SymbolRate> Default unit: Hz
Example: DDEM:SRAT 10KHZ
Define symbol rate.
[SENSe:]DDEMod:TIME <ResultLength>
This command defines the number of symbols to be evaluated.
Remote Control - Commands
www.allice.de Allice Messtechnik GmbH