Getting Started
R&S
®
Spectrum Rider FPH
58
User Manual 1321.1011.02 ─ 11
Location to secure GPS receiver (R&S HA-Z340)
Figure 3-6: Location of GPS receiver
●
Tighten the knob screw supplied with the GPS receiver to the screw track at the
back of R&S Spectrum Rider.
●
The GPS receiver can be conveniently attached to the knob screw as shown in
The "Instrument Setup" dialog box provides all settings necessary to configure the
GPS receiver.
Enabling the GPS receiver
1. In the "Instrument Setup" dialog box, select the "GPS" item.
A drop-down menu opens to turn the GPS receiver on or off.
2. Turn the GPS receiver on or off as required.
When "GPS" item is turned on, the R&S Spectrum Rider is ready to receive GPS data.
Displaying GPS information
1. In the "Instrument Setup" dialog box, select the "Show GPS Information" item.
A drop-down menu opens to turn the display of the GPS information on and off.
2. Turn the display of GPS information on or off as required.
When the "Show GPS Information" item is set on, the R&S Spectrum Rider displays
the GPS coordinates and number of satellites in the
when
sufficient connection is established to the GPS satellites.
Instrument Tour
www.allice.de
Allice Messtechnik GmbH
