Remote Commands
R&S
®
Spectrum Rider FPH
352
User Manual 1321.1011.02 ─ 11
13.6.2.8
Using Display Lines and Limit Lines
The following commands define the display lines and limit lines.
Display Lines
The following commands define the position of the display line.
List of commands
................................................................................................ 352
...................................................................................... 352
CALCulate<1...2>:DLINe
<LinePosition>
This command defines the position of a display line.
The numeric suffix at CALCulate is irrelevant for this command.
Suffix:
<1...2>
.
1...2
Parameters:
<LinePosition>
Numeric value with a variable range and unit.
You can use any unit you want, the R&S Spectrum Rider then
converts the unit to the currently selected unit. If you omit a unit,
the R&S Spectrum Rider uses the currently selected unit.
*RST:
– (STATe to OFF)
Default unit: dBm
Example:
CALC:DLIN –20dBm
Sets the display line threshold to -20 dBm.
CALCulate<1...2>:DLINe:STATe
<State>
This command turns display lines on and off.
The numeric suffix at CALCulate is irrelevant for this command.
Suffix:
<1...2>
.
1...2
Parameters:
<State>
ON | OFF
*RST:
OFF
Example:
CALC:DLIN:STAT OFF
Turns on the display line.
Limit Lines
The following commands define limit lines and perform the corresponding limit checks.
Remote Control - Commands
www.allice.de
Allice Messtechnik GmbH
