Getting Started
R&S
®
Spectrum Rider FPH
47
User Manual 1321.1011.02 ─ 11
FUNCTION keys
Descriptions
[WIZARD]
Performs a sequence of standardized and recurring measure-
ments.
See
Chapter 5, "Working with the Measurement Wizard"
[BW]
Sets the resolution bandwidth and the video bandwidth.
[SWEEP]
Sets the sweep time.
Sets the trigger mode, trigger threshold and the trigger delay of
the external trigger signal.
Selects continuous measurement or single measurement.
[TRACE]
Configures the measured data acquisition and the analysis of
the measurement data.
[MEAS]
Mode-dependent button.
This key provides functionality to select and configure measure-
ments in the available measurement modes.
For more information, see the corresponding measurement
modes in the R&S Spectrum Rider user manual.
[MARKER]
Mode-dependent button.
Sets and positions the absolute and relative measurement mark-
ers (markers and delta markers).
Marker positioning using peak, next peak, minimum level, refer-
ence level and center frequency.
Marker search limit function.
Enables or disables checkbox for "View List" function.
Provides the following marker functions:
●
Marker mode function which provides capability to measure
noise, measure frequency using frequency counter and
measure bandwidth using the N dB down setting.
●
Marker display setting using the frequency or channel table.
●
AM and FM marker demodulation.
For more information, see
Chapter 6.2.7, "Using Markers"
3.2.5.6
Keypad
The keypad is used to enter alphanumeric parameters, including the corresponding
units.
Instrument Tour
www.allice.de
Allice Messtechnik GmbH
