Receiver Mode
R&S
®
Spectrum Rider FPH
282
User Manual 1321.1011.02 ─ 11
1. Measurement (or receive) frequency
2. Power level measured at the receive frequency
3. Horizontal bargraph that graphically represents the currently measured power
level.
In the default state, the R&S Spectrum Rider performs the measurement on a single
receive frequency. If it instead shows the result display for a frequency scan, you can
access the single frequency result display manually.
1. Press [MEAS] key.
2. Select "Fixed Freq" softkey.
The R&S Spectrum Rider shows the result display for single frequency measurements.
1 = Operating mode
2 =
3 =
4 = Corresponding power level of the receiver frequency
5 = Maximum hold power level of the receiver frequency
6 = Refresh button to refresh peak hold power level of the receiver frequency
7 = Bargraph
8 = Maximum hold power level indicator
9 = Upper limit threshold indicator
10 = Lower limit threshold indicator
11 =
12 = Receiver softkey menu
Selecting the Measurement Mode
www.allice.de
Allice Messtechnik GmbH
