Getting Started
R&S
®
Spectrum Rider FPH
40
User Manual 1321.1011.02 ─ 11
Device warning messages (e.g IF Ovl) are displayed at the top right-hand corner of the
window.
Device Warning Message
●
IF Ovl: This message indicates that the downconverter of the intermediate fre-
quency (IF) is overloaded in R&S Spectrum Rider.
●
In general, a star indicates that the measurement is still in progress.
3.2.3.4
Parameter View
The "Parameter view" contains the important trace setting parameters for the spectrum
measurement.
It is located at the right side and bottom section of the layout . See
.
You can select any parameter in the "Parameter view" to adjust the configurations of
the spectrum measurement. See details of each of the parameter in the R&S Spectrum
Rider user manual.
Parameter settings
Description
"Center", "Start", "Stop"
This display setting is function-specific depending
on the softkey ("Center Freq", "Start Freq", "Stop
Freq") indicated in the softkey label. See
It displays an entry box to configure the center fre-
quency, start or stop frequency for the spectrum
measurement.
"Trace"
Select "Trace" to display the trace menu with a list of
settings ("Clear/Write", "Average", "Min Hold", "Max
Hold").
Instrument Tour
www.allice.de
Allice Messtechnik GmbH
