Rohde & Schwarz 1321.0615.02, User Manual

Page: 317 / 581

Remote Commands
R&S
®
Spectrum Rider FPH
310 User Manual 1321.1011.02 ─ 11
Each section describes the commands for one of the operating modes available in the
R&S Spectrum Rider, beginning with the description of common commands required to
operate the instrument. The structure is based on that of the R&S Spectrum Rider user
manual.
●
Chapter 13.6.1, "Common Commands" , on page 311
●
Chapter 13.6.2, "Remote Commands of the Spectrum Analyzer" , on page 314
●
Chapter 13.6.3, "Remote Commands of the Analog Modulation" , on page 388
●
Chapter 13.6.4, "Remote Commands of the Digital Modulation" , on page 402
●
Chapter 13.6.5, "Remote Commands of the Power Meter" , on page 422
●
Chapter 13.6.6, "Remote Commands of the Receiver Mode" , on page 428
Each section is subdivided into various tasks required to perform measurements with
the R&S Spectrum Rider, also based on the structure of the R&S Spectrum Rider user
manual. Some commands like those for controlling markers or configuring the fre-
quency axis are available for all operating modes. In that case, you can find a list of
these commands in the corresponding section.
Availability of commands
The spectrum mode is implemented in the basic unit. For the other modes, the corre-
sponding options are required.
Following the remote control commands required to perform specific measurements,
you can find a description of general commands used to set up and control basic
instrument functions. These commands are independent of the operating mode. There-
fore they are listed separately.
●
Chapter 13.6.7, "File Management" , on page 459
●
Chapter 13.6.8, "Making and Storing Screenshots" , on page 465
●
Chapter 13.6.9, "Configuring Data Capture" , on page 466
●
Chapter 13.6.10, "Saving Events" , on page 468
●
Chapter 13.6.11, "Configuring the Instrument" , on page 471
●
Chapter 13.6.12, "Status Reporting System" , on page 486
All chapters begin with a list of commands available in the context of that chapter. Fol-
lowing that list, you can find a detailed description of all the commands.
All individual descriptions contain:
●
Complete notation and syntax of the command
●
Description of the effects of the command
●
A list of all parameters available for that command or the type of data the com-
mand returns in case of query commands
●
An example of how a program message would look like
●
The
*RST
value
An alphabetical list of all available commands is provided at the end of this manual.
Remote Control - Commands
www.allice.de Allice Messtechnik GmbH