![Rohde & Schwarz 1321.0615.02 User Manual Download Page 444](http://html1.mh-extra.com/html/rohde-and-schwarz/1321-0615-02/1321-0615-02_user-manual_1477771444.webp)
Remote Commands
R&S
®
Spectrum Rider FPH
437
User Manual 1321.1011.02 ─ 11
List of Commands
DISPlay<1...2>:BARGraph:PHOLd:RESet
........................................................................ 437
DISPlay<1...2>:BARGraph:PHOLd:RESet
........................................................................ 437
.................................................................................................438
ABORt
This command aborts the current measurement and resets the trigger system.
This command is an event and therefore has no query and no *RST value.
Example:
ABOR;
INIT:IMM
Aborts a measurement and starts a new one.
Usage:
Event
DISPlay<1...2>:BARGraph:PHOLd:RESet
This command resets the maximum hold power level of the receiver frequency.
This command is an event and therefore has no query and no *RST value.
The numeric suffix at DISPlay is irrelevant for this command.
Suffix:
<1...2>
.
1...2
Example:
DISP:BRAG:PHOL:RES
Usage:
Event
DISPlay<1...2>:BARGraph:PHOLd:RESet
This command resets the maximum hold power level of the receiver frequency.
This command is an event and therefore has no query and no *RST value.
The numeric suffix at DISPlay is irrelevant for this command.
Suffix:
<1...2>
.
1...2
Example:
DISP:BRAG:PHOL:RES
Usage:
Event
INITiate[:IMMediate]
This command initiates a new measurement sequence.
Remote Control - Commands
www.allice.de
Allice Messtechnik GmbH