Spectrum Analyzer Mode
R&S
®
Spectrum Rider FPH
165
User Manual 1321.1011.02 ─ 11
2. Use the rotary knob to move the marker on the horizontal axis to the frequency you
want to analyze or enter the frequency directly with the number keys.
3. Select "Select Time Line" softkey and browse through the spectrums using the
rotary knob until the spectrum of interest is displayed in the upper window.
The timestamp of the selected time-line gives you a precise indication on when the
event shown in the spectrum occurred.
For more information on marker functionality, see
Chapter 6.2.7, "Using Markers"
Switching back to active spectrogram recording
To resume recording of a new spectrogram:
► Select "Live Update" softkey at any time you are in playback mode.
The R&S Spectrum Rider switches back to perform live measurements.
6.1.9.6
Configuring and Triggering the Sweep
For more information on setting the sweep, see
Chapter 6.2.5.1, "Setting the Sweep
For more information on the trigger functionality, see
Chapter 6.2.5.3, "Working with
6.1.10
Using Isotropic Antennas
The R&S Spectrum Rider supports measurements with an isotropic antenna.
Depending on the measuring frequency requirement, you can order the isotropic
antenna in the following list:
Performing Spectrum Measurements
www.allice.de
Allice Messtechnik GmbH
