Remote Commands
R&S
®
Spectrum Rider FPH
441
User Manual 1321.1011.02 ─ 11
When you use the command for 3GPP WCDMA measurements in the Digital Modula-
tion operating mode, the command also turns the use of an isotropic antenna on and
off.
The numeric suffix at TRANsducer specifies the primary or secondary transducer.
Suffix:
<1...2>
.
1...2
Parameters:
<State>
ON | OFF
0
Transducer is not an isotropic antenna.
1
Transducer is an isotropic antenna.
Example:
CORR:TRAN:ISOT?
only an example
13.6.6.5
Working with Traces
The following commands set up the trace and the various functions associated with it,
e.g. trace mathematics or the selection of the detector.
List of Commands
[SENSe:]DETector<1...2>[:FUNCtion]
...............................................................................441
CALCulate<1...2>:MATH<1...2>:COPY:MEMory<1...3>
......................................................442
DISPlay<1...2>[:WINDow]:TRACe<1...2>[:STATe]
............................................................. 442
DISPlay<1...2>[:WINDow]:TRACe<1...2>:MEMory<1...3>[:STATe]
...................................... 442
DISPlay<1...2>[:WINDow]:TRACe<1...2>:MODE
...............................................................443
...................................................................................443
......................................................................................445
[SENSe:]DETector<1...2>[:FUNCtion]
<Detector>
This command selects a detector function.
The numeric suffix at DETector specifies the primary or secondary detector.
Suffix:
<1...2>
.
1...2
Parameters:
<Detector>
POSitive | NEGative | SAMPle | RMS | AVERage | APEak
*RST:
APE
For more information, see chapter "Detectors".
Example:
DET POS
Sets the primary detector to "positive peak".
Remote Control - Commands
www.allice.de
Allice Messtechnik GmbH
