![Rohde & Schwarz 1321.0615.02 User Manual Download Page 179](http://html1.mh-extra.com/html/rohde-and-schwarz/1321-0615-02/1321-0615-02_user-manual_1477771179.webp)
Spectrum Analyzer Mode
R&S
®
Spectrum Rider FPH
172
User Manual 1321.1011.02 ─ 11
Advanced EIRP measurement
With advanced EIRP measurment, the R&S Spectrum Rider can performs dual polari-
zation.
1. Press [MEAS] key.
2. Select "Advanced Setting" softkey.
The R&S Spectrum Rider displays the following softkey for selection:
● "Capture Horizontal": Capture the current EIRP horizontal value
● "Capture Vertical": Capture the current EIRP vertical value
● "Clear Meas": Clear horizontal and vertical value, the sum becomes "---"
3. Select the required measurment.
The R&S Spectrum Rider added the selected measurement in the EIRP info bar.
6.2
Configuring Spectrum Measurements
Basic measurement settings that are common to many measurement tasks, regardless
of the application or operating mode, are described here. If you are performing a spe-
cific measurement task, using an operating mode other than Signal and Spectrum Ana-
lyzer mode, or an application other than the Spectrum application, check the specific
application or mode description for settings that may deviate from these common set-
tings.
.........................................................................................172
Configuring the Horizontal Axis
.............................................................................173
................................................................................. 177
............................................................................................... 181
Configuring and Triggering the Sweep
..................................................................184
..............................................................................................190
...............................................................................................206
6.2.1
Configuration Overview
The "Configuration Overview" provides an overview on the most important currently
defined settings for the spectrum measurement. See
on page 42. It is displayed when you select the "Config Overview" icon, which is availa-
ble at the bottom of "Parameter View". See
Chapter 3.2.3.4, "Parameter View"
Configuring Spectrum Measurements
www.allice.de
Allice Messtechnik GmbH