![Rohde & Schwarz 1321.0615.02 User Manual Download Page 324](http://html1.mh-extra.com/html/rohde-and-schwarz/1321-0615-02/1321-0615-02_user-manual_1477771324.webp)
Remote Commands
R&S
®
Spectrum Rider FPH
317
User Manual 1321.1011.02 ─ 11
[SENSe:]FREQuency:OFFSet
<FreqOffset>
This command defines a frequency offset.
Parameters:
<FreqOffset>
Range:
-100 GHz to 100 GHz
*RST:
0 Hz
Default unit: GHz
Example:
FREQ:OFFS 1GHZ
Defines a frequency offset of 1 GHz.
[SENSe:]FREQuency:SPAN
<FrequencySpan>
This command defines the frequency span.
If you set a span of 0 Hz, the R&S Spectrum Rider starts a measurement in the time
domain.
Parameters:
<FrequencySpan>
Range:
Specified in the data sheet.
*RST:
fmax with fmax = maximum frequency
Default unit: GHz
Example:
FREQ:SPAN 10MHz
Defines a span of 10 MHz.
[SENSe:]FREQuency:SPAN:AUTO
<State>
This command turns on or off the automatic calculation of the ideal span.
Parameters:
<State>
ON | OFF
*RST:
OFF
Example:
FREQ:SPAN:AUTO ON
Turns on the automatic span determination.
[SENSe:]FREQuency:SPAN:FULL
This command restores the full span.
This command is an event and therefore has no query and no *RST value.
Example:
FREQ:SPAN:FULL
Restores full span.
Usage:
Event
[SENSe:]FREQuency:STARt
<StartFrequency>
This command defines the start frequency for measurements in the frequency domain
(span > 0).
Remote Control - Commands
www.allice.de
Allice Messtechnik GmbH