Remote Commands
R&S
®
Spectrum Rider FPH
424
User Manual 1321.1011.02 ─ 11
Example:
CALC:PMET:REL 30
The reference value to 30 dBm.
CALCulate<1...2>:PMETer:RELative[:MAGNitude]:AUTO
<ONCE>
This command sets the current measurement result as the reference level for relative
measurements.
This command is an event and therefore has no *RST value and no query.
The numeric suffix at CALCulate is irrelevant for this command.
Parameters:
<ONCE>
ONCE
Example:
CALC:PMET:REL ONCE
CALCulate<1...2>:PMETer:RELative[:MAGNitude]:OFFSet
<RefLvlOffset>
This command sets an offset for the reference value.
The numeric suffix at CALCulate is irrelevant for this command.
Parameters:
<RefLvlOffset>
Default unit: dB
Example:
CALC:PMET:REL -10
UNIT<1...2>:PMETer:POWer
<Unit>
This command selects the unit of the power sensor.
The numeric suffix at UNIT has the following effects:
Table 13-4: Power measurement with R&S FSH-Z1, R&S FSH-Z18 and USB power sensors:
Unit 1
Power unit.
Unit 2
Not available.
Table 13-5: Power measurement with R&S FSH-Z14 and R&S FSH-Z44:
Unit 1
Forward power.
Unit 2
Reflected power.
Suffix:
<1...2>
.
1...2
Remote Control - Commands
www.allice.de
Allice Messtechnik GmbH
