Interference Analyzer
R&S
®
Spectrum Rider FPH
275
User Manual 1321.1011.02 ─ 11
Adding the triangulation result to the GPS position list
1. Select "GPS Position" softkey.
2. Select "Save" softkey.
The R&S Spectrum Rider opens a submenu to select the different geotags saving
options.
3. Select the "Triangulation" menu item.
The R&S Spectrum Rider opens an input field to enter a name and description for
the triangulation geotag.
4. Enter a name and description.
5. Select the "Save" button to save the new geotag.
The R&S Spectrum Rider creates a geotag in the "GPS Position List".
For more information on the "GPS Position List", see
11.3.5.3
Indoor Mapping
When you enter the "Indoor Mapping" application, the R&S Spectrum Rider always
shows the signal strength at the top of the display or in the power bar at the left side of
the display. See
.
The method to collect data in the indoor mapping is similar to that of collecting geotags
in large-scale map mode.
When you perform a measurement at a particular spot on the map, the application cre-
ates a tag (represented by a colored dot) and draws it on the map at your current loca-
tion. The color of the dot represents the signal strength received at that location, see
Chapter 11.3.3.5, "Selecting Colors for Map Locations"
Creating tags
You can create a tag on any place of the map. To do so, you first have to move the
cross-hairs on the map display to the position you are currently at. For more informa-
tion, see
Chapter 11.3.3.4, "Aligning the Indoor Mapping Mode"
Working with Maps
www.allice.de
Allice Messtechnik GmbH
