Spectrum Analyzer Mode
R&S
®
Spectrum Rider FPH
170
User Manual 1321.1011.02 ─ 11
1 = EIRP measurement result
2 = EIRP max hold value which updates when a new higher value is found
3 =
4 =
5 = Path loss (
6 = EIRP info bar
After you have turned on the directional antenna, the R&S Spectrum Rider uses
the directional antenna for all measurements.
Note:
When you turn on the directional antenna without selecting a transducer fac-
tor, the R&S Spectrum Rider displays the file manager dialog to select a transducer
factor. When the directional antenna is turn off, the transducer factor is unloaded.
For more information on using transducer factors for antenna, see
Selecting standard
The R&S Spectrum Rider provides predefined telecommunication standards, however,
you can also customized your own standard for measurements.
Chapter 6.1.2.1, "Selecting the Standard"
Adjusting reference level
The R&S Spectrum Rider provides a "Level Adjust" function to optimise the dynamic
range of the measurement with expectation of the power level at the RF input.
Chapter 6.1.2.2, "Setting the Reference Level"
Performing Spectrum Measurements
www.allice.de
Allice Messtechnik GmbH
