Remote Commands
R&S
®
Spectrum Rider FPH
362
User Manual 1321.1011.02 ─ 11
<1...6>
1...6
Parameters:
<MeasType>
MCACpower | ACPower | CPOWer | EIRPpower | OBANdwidth |
OBWidth | TDMA
MCACpower | ACPower
Adjacent Channel Leakage Ratio measurement (ACLR) aka
adjacent channel power or multi carrier adjacent channel.
CPOWer
Chanel power measurement.
EIRPpower
Effective Isotropic Radiated Power measurement.
OBANdwidth | OBWidth
Occupied Bandwidth measurement.
TDMA
TDMA power measurement.
Example:
CALC:MARK:FUNC:POW:SEL CPOW
Selects the channel power measurement.
CALCulate<1...2>:MARKer<1...6>:FUNCtion:POWer[:STATe]
<State>
This command turns a power measurement on and off.
You can select a power measurement with
CALCulate<1...2>:MARKer<1...6>:
The numeric suffix at CALculate and MARKer are irrelevant for this command.
Parameters:
<State>
ON | OFF
ON
Turns the power measurement on.
OFF
Performs a basic spectrum measurement.
*RST:
OFF
Example:
CALC:MARK:FUNC:POW OFF
Switches off the power measurement.
CALCulate<1...2>:MARKer<1...6>:FUNCtion:POWer:PRESet
<Standard>
This command selects one of the predefined configurations for a telecommunications
standard. This command only works if you have turned on power measurements with
CALCulate<1...2>:MARKer<1...6>:FUNCtion:POWer[:STATe]
The configuration for a standard is in line with the specifications and includes parame-
ters like weighting filter, channel bandwidth and spacing, resolution and video band-
width, as well as detector and sweep time.
The numeric suffix at CALculate and MARKer are irrelevant for this command.
Remote Control - Commands
www.allice.de
Allice Messtechnik GmbH
