Spectrum Analyzer Mode
R&S
®
Spectrum Rider FPH
198
User Manual 1321.1011.02 ─ 11
●
"Set to Peak"
The peak function places the active marker or the delta marker on the highest level
value of the trace.
●
"Set to Next Peak"
The next peak function places the active marker or delta marker on the next high-
est level value of the trace, relative to its current position.
●
"Set to Minimum"
The minimum function places the active marker or delta marker on the lowest value
of the trace.
6.2.7.6
Removing Markers
Remove markers any time you want from the trace window.
Removing selected markers
1. Select the marker you want to delete in the
Alternatively, you can select the marker you want to delete with the "Select Marker"
softkey
The selected marker is highlighted in the
sponding label in the trace window turns focus with a blue frame around the marker
label. The R&S Spectrum Rider opens a marker input field.
2. Select "Delete Marker" softkey.
3. Select "Delete Selected" menu item.
4. Confirm the selection by pressing the rotary knob.
The R&S Spectrum Rider deletes the marker.
Deactivating markers
If you delete marker 1 (M1), all delta markers that are relative to that marker are also
deleted.
Removing delta markers only
1. Select the delta marker you want to delete in the
.
Alternatively, press the [MARKER] key.
2. Select "Delete Marker" softkey.
3. Select the "Delete All Delta" menu item.
4. Confirm the selection by pressing the rotary knob.
The R&S Spectrum Rider deletes all delta markers.
Removing all markers at the same time.
1. Press [MARKER] key.
Configuring Spectrum Measurements
www.allice.de
Allice Messtechnik GmbH
