Remote Commands
R&S
®
Spectrum Rider FPH
372
User Manual 1321.1011.02 ─ 11
Suffix:
<1...2>
.
1...2
<1...6>
1...6
Parameters:
<Unit>
DBM | DBMV | DBUV | DBUA | VOLT | WATT | DUVM | DUAM |
V | W | V_M | W_M2
*RST:
1
Example:
CALC:MARK:FUNC:ACP:UNIT DBM ACLR
Results are converted into the unit dBm.
[SENSe:]POWer:ACHannel:ACPairs
<#ofAdjacentChannels>
This command defines the number of pairs of adjacent channels.
Parameters:
<#ofAdjCh>
The number corresponds to a pair of adjacent channels, one
channel on the left and one on the right of the transmission
channel.
Range:
1 to 12
*RST:
1
Example:
See
[SENSe:]POWer:ACHannel:TXCHannel:COUNt
[SENSe:]POWer:ACHannel:BANDwidth[:CHANnel]
<TxChannelBandwidth>
This command defines the channel bandwidth of the transmission channels.
Instead of BANDwidth, you can also use the alias BWIDth.
Parameters:
<TxChBw>
*RST:
14 kHz
Default unit: GHz
Example:
See
[SENSe:]POWer:ACHannel:TXCHannel:COUNt
[SENSe:]POWer:ACHannel:BANDwidth[:ACHannel]
<AdjChannelBandwidth>
This command defines the channel bandwidth of the adjacent channel.
The adjacent channel is the first pair of channels next to the transmission channels. If
you set the channel bandwidth for these channels, the R&S Spectrum Rider sets the
bandwidth of the alternate channels to the same value.
Instead of BANDwidth, you can also use the alias BWIDth.
Parameters:
<AdjChBw>
*RST:
14 kHz
Default unit: GHz
Remote Control - Commands
www.allice.de
Allice Messtechnik GmbH
