Instrument Functions
R&S
®
Spectrum Rider FPH
103
User Manual 1321.1011.02 ─ 11
Data types
You can select several data types to save when an event occurs.
●
A screenshot of the sweep that contains the event (
.png
or
.jpg
file)
●
A dataset of the sweep that contains the event (
.set
file)
●
A dataset of the sweep that contains the event saved as CSV format (
.csv
file)
●
The GPS coordinates of the location where the event happens (
.gpx
file).
1. Press [SETUP] key.
2. Select "User Preference" softkey.
3. Select the "Capture Screen", "Capture Dataset", "Capture Dataset as CSV" or
"Capture GPX" menu item and turn it on or off.
If the setting is turns "On", the corresponding information is included in the saved
data.
See
Chapter 4.6, "Taking Screenshots"
Timing of the data capture
The R&S Spectrum Rider evaluates the measured data after a sweep is done and thus
detects and saves an event only after a sweep has been completed.
Event types
To use the "Save on Event" functionality, you have to select an event type that triggers
the capture of the selected data. The R&S Spectrum Rider supports several event
types.
Single sweeps and sweep time
It is not possible to save measurement data in single sweep mode because the R&S
Spectrum Rider only performs one sweep and then stops.
The time interval must be longer than the sweep time. If the time interval is shorter, the
R&S Spectrum Rider is not able to save data because a sweep has to be complete
before the R&S Spectrum Rider is able to save the data.
1. Press [SETUP] key.
2. Select "User Preference" softkey.
3. Select the "Event Source" menu item.
A drop-down menu to select the event trigger source opens.
Saving On Events
www.allice.de
Allice Messtechnik GmbH
