Remote Commands
R&S
®
Spectrum Rider FPH
442
User Manual 1321.1011.02 ─ 11
CALCulate<1...2>:MATH<1...2>:COPY:MEMory<1...3>
[<MemorySlot>]
This command stores the selected trace into the memory trace of the R&S Spectrum
Rider.
This command is an event and therefore has no query and no *RST value.
The numeric suffix at CALCulate and MEMory are irrelevant for this command.
The numeric suffix at MATH selects the number of the trace.
Suffix:
<1...2>
.
1...2
<1...2>
1...2
<1...3>
1...3
Parameters:
<MemorySlot>
Example:
CALC:MATH:COPY:MEM
Usage:
Setting only
Copies the trace into the memory.
DISPlay<1...2>[:WINDow]:TRACe<1...2>[:STATe]
<State>
This command turns a trace on and off.
The numeric suffix at DISPlay is irrelevant for this command.
The numeric suffix at TRACe selects the number of the trace.
Parameters:
<State>
ON | OFF
*RST:
ON for TRACe1, OFF for TRACe2
Example:
DISP:TRAC2 ON
Turns on the trace 2.
DISPlay<1...2>[:WINDow]:TRACe<1...2>:MEMory<1...3>[:STATe]
<State>
This command turns the memory trace on and off.
The numeric suffix at DISPlay and MEMory are irrelevant for this command.
The numeric suffix at TRACe selects the number of the trace.
Suffix:
<1...2>
.
1...2
<1...2>
1...2
<1...3>
1...3
Remote Control - Commands
www.allice.de
Allice Messtechnik GmbH
