Rohde & Schwarz 1321.0615.02, User Manual

Page: 32 / 581

Getting Started
R&S
®
Spectrum Rider FPH
25 User Manual 1321.1011.02 ─ 11
Depending on the system you need, firmly connect the appropriate power cable inclu-
ded in the delivery to the AC adapter (item 2 of
Figure 3-1 ).
Finally, connect the power cable plug to an AC power outlet.
Figure 3-1: AC adapter
1 = AC adapter
2 = Power cable
The voltage range of the AC power supply is 100 V to 240 V AC.
After the R&S Spectrum Rider is connected to the power supply, you can turn it on with
the [Power] key on the front panel.
3.1.1.5 Battery Operation
The R&S Spectrum Rider has a smart battery indicator which displays the battery
charging status on the [Power] key as well as the battery icon shown at the top right
corner of the display screen. See
Chapter 3.2.3.1, "Title Bar" , on page 38.
The lithium ion battery has a capacity of 6.4 Ah and it allows operation of up to eight
hours when it is fully charged.
The actual operation time depends on the current charged status (see Figure 3-2 ), the
ambient temperature and the operating mode of the R&S Spectrum Rider.
For a summary of the LED indication of the [Power] key, see Table 3-1 .
The battery charging and discharging process of the battery icon indicated in the dis-
play screen is illustrated below:
Figure 3-2: Battery charging and discharging process
Charging time is about three hours when the R&S Spectrum Rider is in inactive mode
(i.e. R&S Spectrum Rider is switched off). If the instrument is in active mode (i.e. R&S
Preparing for Use
www.allice.de Allice Messtechnik GmbH