Remote Commands
R&S
®
Spectrum Rider FPH
457
User Manual 1321.1011.02 ─ 11
Suffix:
<1...2>
.
1...2
<1...2>
1...2
Example:
CALC:LIM2:DEL
Deletes the second limit line.
CALCulate<1...2>:LIMit<1...2>:FAIL?
This command queries the result of a limit check.
To get a valid result, you have to perform a complete sweep with synchronization to the
sweep end before reading out the result. This is only possible in single sweep mode.
The numeric suffix at CALCulate is irrelevant for this command. The numeric suffix at
LIMit selects the limit line.
Suffix:
<1...2>
.
1...2
<1...2>
1...2
Example:
INIT;*WAI
CALC:LIM1:FAIL?
Performs a measurement and queries the result of the check for
limit line 1.
Return value: 0 for pass and 1 for fail.
Usage:
Query only
CALCulate<1...2>:LIMit<1...2>:LOWer:SELect
<LimitLine>
This command selects the lower limit line.
This command is an event and therefore has no *RST value and no query.
The numeric suffix at CALCulate is irrelevant for this command. The numeric suffix at
LIMit selects the limit line.
Suffix:
<1...2>
.
1...2
<1...2>
1...2
Parameters:
<LimitLine>
String containing the filename of the lower limit line.
Example:
CALC:LIM1:LOW:SEL 'GSM_Lower.rellim'
Selects the lower limit line.
Usage:
Setting only
CALCulate<1...2>:LIMit<1...2>:STATe
<State>
This command turns a limit check on and off.
Remote Control - Commands
www.allice.de
Allice Messtechnik GmbH
