Rohde & Schwarz 1321.0615.02, User Manual

Page: 295 / 581

Receiver Mode
R&S
®
Spectrum Rider FPH
288 User Manual 1321.1011.02 ─ 11
Figure 12-2: Channel scan
1. Press [FREQ] key.
2. Select "Freq Mode" softkey.
The R&S Spectrum Rider opens a submenu containing the different channel
options for selection.
3. Select the "Channel Downlink" or "Channel Uplink" to define the channel table.
The R&S Spectrum Rider opens a dialog box to select the channel table.
For more information on working with channel tables, see Chapter 6.3, "Working with
Channel Tables" , on page 209.
12.1.2.2 Using Markers
The scan measurement in receiver mode features the same marker functionality as
that in spectrum mode.
For more information, see Chapter 6.2.7.1, "Using Markers and Deltamarkers" ,
on page 195.
12.2 Configuring Measurements in Receiver Mode
In addition to the single frequency measurement and the scan measurement, the
receiver mode also adds features in accordance with EMI measurements.
● Selecting Detectors for EMI Measurements ..........................................................289
● Selecting the Measurement Bandwidths for EMI Measurements ......................... 290
● Defining the Measurement Time ........................................................................... 290
Configuring Measurements in Receiver Mode
www.allice.de Allice Messtechnik GmbH