Rohde & Schwarz 1321.0615.02, User Manual

Page: 461 / 581

Remote Commands
R&S
®
Spectrum Rider FPH
454 User Manual 1321.1011.02 ─ 11
●
CALCulate<1...2>:MARKer<1...6>:FUNCtion:DEModulation:HOLD
on page 349
●
CALCulate<1...2>:MARKer<1...6>:FUNCtion:DEModulation:SELect
on page 349
●
CALCulate<1...2>:MARKer<1...6>:FUNCtion:FIXed
on page 455
CALCulate<1...2>:MARKer<1...6>:FREQuency:MODE <Mode>
This command selects the marker frequency display mode.
The numeric suffix at CALCulate is irrelevant for this command. The numeric suffix at
MARKer selects the marker.
Parameters:
<Mode> FREQuency | CHANnel
FREQuency
Sets the marker frequency mode to frequency input (in Hz).
CHANnel
Sets the marker frequency mode to channel input (as a channel
number).
*RST:
FREQ
Example: CALC:MARK:FREQ:MODE FREQ
Selects the frequency display mode.
CALCulate<1...2>:MARKer<1...6>:FUNCtion:DEModulation[:STATe] <State>
This command turns the audio demodulator on and off when the measurement hits a
marker position.
With span > 0, you can define a hold time at the marker position with
CALCulate<1...2>:MARKer<1...6>:FUNCtion:DEModulation:HOLD
on page 349.
In zero span, the demodulation is on permanently.
The numeric suffix at CALCulate is irrelevant for this command. The numeric suffix at
MARKer selects the marker.
Suffix:
<1...2>
.
1...2
<1...6> 1...6
Parameters:
<State> ON | OFF
*RST:
OFF
Example: CALC:MARK3:FUNC:DEM ON
Switches on the demodulation for marker 3.
Remote Control - Commands
www.allice.de Allice Messtechnik GmbH