Getting Started
R&S
®
Spectrum Rider FPH
42
User Manual 1321.1011.02 ─ 11
"SWT"
Select "SWT" to display an entry box to configure
the sweep time of the spectrum measurement.
"Config Overview"
Select "Config Overview" to display the configura-
tion overview window for more configuration options
for the spectrum measurement. See
Configuration Overview
The "Config Overview" is a dedicated button located at the bottom of the "Parameter
View", it is operation mode dependent. See
.
When you select this button, it opens the "Config Overview" window. Accessing it with-
out the touchscreen input is possible via the [SETUP] key. See
The "Config Overview" illustrates the flow of spectrum measurement at different stages
and the relevant parameters which have impact on the measurement at each stage.
The "Config Overview" window is divided into six categories:
Table 3-3: Corresponding dialog box of "Config Overview" window
"Config Overview" block
Corresponding dialog box
Description
Select "Input" to configure RF
impedance.
Instrument Tour
www.allice.de
Allice Messtechnik GmbH
