Remote Commands
R&S
®
Spectrum Rider FPH
468
User Manual 1321.1011.02 ─ 11
Parameters:
<State>
ON | OFF
*RST:
OFF
Example:
SYST:CAPT:GPX ON
Includes GPX information into the data capture.
SYSTem:CAPTure:MODE
<CaptureMode>
This command selects the data types that the R&S Spectrum Rider saves when you
capture the current measurement data.
Parameters:
<CaptureMode>
SCReen | DATaset | BOTH
SCReen
Saves a screenshot.
DATaset
Saves a dataset.
BOTH
Saves a screenshot and a dataset.
*RST:
SCReen
Example:
SYST:CAPT:MODE BOTH
Captures both a screenshot and a dataset of the current mea-
surement.
SYSTem:CAPTure:SCReen[:STATe]
<State>
This command includes or excludes screenshots from the data capture.
Parameters:
<State>
ON | OFF
*RST:
ON
Example:
SYST:CAPT:SCR ON
Includes screenshots into the data capture.
13.6.10
Saving Events
The following commands configure the circumstances under which the R&S Spectrum
Rider saves events.
These commands are independent from the operating mode.
Using the commands requires a GPS receiver and a storage device (SD card or mem-
ory stick).
Remote Control - Commands
www.allice.de
Allice Messtechnik GmbH
