Motorola WiNG 4.4 Page 89 Reference Manual Download

Page: 89 / 598

Switch Information 3 - 31

4. Select an existing firmware version and click the

Edit

button to change the firmware version used when the switch is

booted next. For more information, see

Editing the Switch Firmware on page 3-31

5. Click on the

Global Settings

button to specify a firmware version for use with the failover image. For more

information, see

Enabling Global Settings for the Image Failover on page 3-31

6. Click on the

Update Firmware

button to update the firmware file loaded onto the switch. For more information, see

Updating the Switch Firmware on page 3-32

7. To remove a patch, select it from amongst those displayed within the Patch field and click the

Remove Patch

button.

3.4.1 Editing the Switch Firmware

The Edit screen enables the user to select a firmware file and designate it as the version used the next time the switch is
booted.

1. Select the primary firmware image from the Firmware screen.

2. Click the

Edit

button.

The

Firmware

screen displays the current firmware version and whether this version is used for the next reboot.

3. Select the checkbox to use this version on the next boot of the switch.

4. To edit the secondary image, select the secondary image, click the

Edit

button, and select the

Use this firmware on

next reboot

checkbox.

This firmware version will now be invoked after the next reboot of the switch.

5. Refer to the

Status

field for the current state of the requests made from the applet. Requests are any “SET/GET”

operation from the applet. The Status field displays error messages if something goes wrong in the transaction
between the applet and the switch.

6. Click the

button to commit the changes made and exit the screen.

3.4.2 Enabling Global Settings for the Image Failover

Use the

Global Settings

screen to specify a firmware version for use with the failover image.

1. Select an image from the table in the Firmware screen.

2. Click the

Global Settings

button.

NOTE:

To apply a patch to the switch, follow the same instructions for updating the

switch’s firmware.

Summary of Contents for WiNG 4.4























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for WiNG 4.4

Reviews:

Related manuals for WiNG 4.4

Brands by name

Popular brands

Motorola WiNG 4.4, Reference Manual

Search results

Summary of Contents for WiNG 4.4

Reviews:

Related manuals for WiNG 4.4

Brands by name

Popular brands