Motorola WiNG 4.4 Reference Manual Download Page 167

Page: 167 / 598

Network Setup 4 - 63

• TX Tput (Mbps)

• NUcast Pkts

• Avg Noise (dBm)

• Undecr Pkts

• RXPkts per sec

• RX Tput (Mbps)

• Avg Retries

• Avg SNR (dB)

•

# Radios

3. Select any of the above listed parameters by clicking on the checkbox associated with it.

4. Click the

Close

button to exit the screen.

4.5.2.3 Viewing WLAN Switch Statistics

The

Switch Statistics

screen displays the sum of all WLAN statistics. The

Switch Statistics

screen is optimal for

displaying a snapshot of overall WLAN traffic on your switch.

To view detailed statistics for a WLAN:

1. Select a

Network

Wireless LANs

from the main menu tree.

2. Click the

Statistics

tab.

3. Select a WLAN from the table displayed in the

Statistics screen

and click the

Switch Statistics

button.

NOTE:

You cannot select (and send) more than four parameters at any given time.

Summary of Contents for WiNG 4.4























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for WiNG 4.4

Reviews:

Motorola WiNG 4.4, Reference Manual, Page: 167 / 598

Search results

Summary of Contents for WiNG 4.4

Reviews: