manualshive.com logo in svg

Motorola WiNG 4.4, Reference Manual, Page: 97 / 598

Share
Download
Motorola WiNG 4.4 Reference Manual Download Page 97

Switch Information 3 - 39

3.6 Configuring Automatic Updates

Use the 

Automatic Updates

 screen to enable a facility that will poll a server address (you designate) when the switch is 

booted. If updates are found since the last time the switch was booted, the updated version is uploaded to the switch the 
next time the switch is booted. Enable this option for either the firmware, configuration file, or cluster configuration file. 
Motorola Solutions recommends leaving this setting disabled if a review of a new file is required before it is automatically 
uploaded by the switch.

To enable and configure the automatic update feature for switch firmware, configuration files, and cluster configurations:

1. Select 

Switch

 

>

 

Automatic Updates 

from the main menu tree. 

2. Refer to the 

Switch Configuration

 

field to enable and define the configuration for automatic configuration file 

updates. If enabled, the located (updated) configuration file will be used with the switch the next time the switch boots. 

Enable

Select the 

Enable 

checkbox to allow an automatic configuration file update when a newer 

(updated) file is detected (upon the boot of the switch) at the specified IP address.

IP Address

Define the 

IP address

 of the server where the configuration files reside. If a new version is 

detected when the switch is booted, it is uploaded to the switch and used upon the next boot of 
the switch.

User ID

Enter the 

User ID

 required to access the FTP or TFTP server.

File Name (With 
Path)

Provide the complete and accurate path to the location of the configuration files on the server. This 
path must be accurate to ensure that the most recent file is retrieved.

Protocol

Use the 

Protocol 

drop-down menu to specify the 

FTP, TFTP, HTTP, SFTP, 

or resident switch

 

FLASH 

medium used for the file update from the server. FLASH is the default setting.

Password 

Enter the password required to access the server.

Switch Note: 

 In addition to the 

Protocols 

listed on the RFS7000, users can also auto-

update using USB or Compact Flash. On the RFS6000, users can also auto-update using
USB.

Summary of Contents for WiNG 4.4























































































































































































































































































































































































































































































































































































































Reviews:

No comments