Motorola WiNG 4.4 Page 79 Reference Manual Download

Page: 79 / 598

Switch Information 3 - 21

• Output Pkts Error

• Input Pkts Total

• Input Pkts Error

• Output Pkts NUCast

• Input Pkts NUCast

• Output Bytes

• Output Pkts Dropped

3. Display any of the above by selecting the checkbox associated with it.

4. Click on the

Close

button to exit out of the screen.

3.2.4 Power over Ethernet (PoE)

The RFS6000 switch supports 802.3af Power over Ethernet (PoE) on each of its eight

ports. The PoE screen allows users

to monitor the power consumption of the ports and configure power usage limits and priorities for each of the

ports.

To view the PoE configuration:

1. Select

Switch

Ports

from the main menu tree.

NOTE:

You are not allowed to select (display) more than four parameters at any given

time.

Switch Note:

Power over Ethernet is supported on the RFS6000 and RFS4000 switches.

Summary of Contents for WiNG 4.4























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for WiNG 4.4

Reviews:

Related manuals for WiNG 4.4

Brands by name

Popular brands

Motorola WiNG 4.4, Reference Manual

Search results

Summary of Contents for WiNG 4.4

Reviews:

Related manuals for WiNG 4.4

Brands by name

Popular brands