Motorola WiNG 4.4 Page 374 Reference Manual Download

Page: 374 / 598

6 - 22 WiNG 4.4 Switch System Reference Guide

4. Click the

Add

button.

5. Use the

Interface

drop-down menu to select the interface to configure on the switch. Available options include – ge

1-8, up 1, VLAN 1 (plus those VLANs created thus far) and Tunnel

(where

equals the name(s) of those tunnels

created thus far).

6. Use the

IP ACL

drop-down menu to select an IP ACL used as the inbound IP for the layer 2 or layer 3 interface.

7. Use the

MAC ACL

drop-down menu to select an MAC ACL used as the MAC IP for the layer 2 interface.

8. Refer to the

Status

field for the state of the requests made from applet. This field displays error messages if something

goes wrong in the transaction between the applet and the switch.

9. Click

to use the changes to the running configuration and close the dialog.

10.Click

Cancel

to close the dialog without committing updates to the running configuration.

6.4.4 Configuring the Role Based Firewall

Use the

Attach Role

screen to view and assign an ACL to a role.

To attach a role:

1. Select

Security

Wireless Firewall

from the main menu tree.

2. Click the

Security Policy

tab.

Summary of Contents for WiNG 4.4























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for WiNG 4.4

Reviews:

Related manuals for WiNG 4.4

Brands by name

Popular brands

Motorola WiNG 4.4, Reference Manual

Search results

Summary of Contents for WiNG 4.4

Reviews:

Related manuals for WiNG 4.4

Brands by name

Popular brands