Motorola WiNG 4.4, Reference Manual

Page: 74 / 598

3 - 16 WiNG 4.4 Switch System Reference Guide
Read-only details about the port’s cabling connection also display within the Edit screen. This information should be
used to determine the configuration defined for this port.
5. Click the OK button to commit the changes made to the port configurations.
6. Click Cancel to disregard any changes and revert back to the last saved configuration.
3.2.2 Viewing the Ports Runtime Status
The Runtime tab displays read-only runtime configuration for uplink and downlink ports.
To view the runtime configuration details of the uplink and downlink ports:
1. Select Switch > Ports from the main menu tree.
Name Displays the read-only name assigned to the port.
Speed Select the speed at which the port can receive and transmit the data. Select from the following
range:
• 10 Mbps
• 100 Mbps
• 1000 Mbps
• Auto
Duplex Modify the duplex status by selecting one of the following options:
• Half
• Full
• Auto
Channel Group Optionally, set the Channel Group defined for the port. The switch bundles individual Ethernet
links (over the selected channel) into a single logical link that provides bandwidth between the
switch and another switch or host. The port speed used is dependant on the Duplex value selected
(full, half, or auto). If a segment within a channel fails, traffic previously carried over the failed link
is routed to the remaining segments within the channel. A trap is sent upon a failure identifying
the switch, channel, and failed link.
Description Enter a brief description for the port. The description should reflect the port’s intended function to
differentiate it from others with similar configurations.
Admin Status Either Enable (activate) or Disable (shutdown) the admin status of the port.
Medium Displays the current (read-only) connection medium used by this port.