manualshive.com logo in svg

Motorola WiNG 4.4, Reference Manual, Page: 463 / 598

Share
Download
Motorola WiNG 4.4 Reference Manual Download Page 463

Switch Security 6 - 111

7. Select the 

Enroll the trustpoint 

checkbox to enroll the certificate request with the CA. 

Organization Unit

Enter an Org. Unit for the name of the organization unit used in the Self-Signed Certificate. By 
default, it is Wireless Switch Division. This is a required field.

Email Address

Provide an email address used as the contact address for issues relating to this certificate 
request.

FQDN

Enter a 

fully qualified domain name

 (FQDN) is an unambiguous domain name that specifies the 

node's position in the DNS tree hierarchy absolutely. To distinguish an FQDN from a regular 
domain name, a trailing period is added. ex: somehost.example.com. An FQDN differs from a 
regular domain name by its absoluteness; as a suffix is not added.

IP Address

Specify the switch IP address used as the switch destination for certificate requests.

Summary of Contents for WiNG 4.4























































































































































































































































































































































































































































































































































































































Reviews:

No comments