manualshive.com logo in svg

Motorola WiNG 4.4, Reference Manual, Page: 118 / 598

Share
Download
Motorola WiNG 4.4 Reference Manual Download Page 118

4 - 14 WiNG 4.4 Switch System Reference Guide

4.4 Configuring Switch Virtual Interfaces

A 

Switch Virtual Interface 

(SVI) is required for layer 3 (IP) access to the switch or to provide layer 3 service on a VLAN. The 

SVI defines which IP address is associated with each VLAN ID that the switch is connected to. An SVI is created for the 
default VLAN (VLAN 1) to enable remote switch administration. An SVI is also used to map VLANs to IP address ranges. 
This mapping determines the destination networks for switch routing. 

Each IP address range (IP Address and Subnet Mask) can be mapped to one (and only one) VLAN ID. A VLAN ID does not 
require an IP address be defined on the switch. Each VLAN ID must be mapped to a physical port using the Layer 2 Virtual 
LANs configuration to communicate with the rest of the network.     

Use the

 Switch Virtual Interfaces

 

screen to view and configure VLAN interfaces. This screen contains two tabs 

supporting the following activities: 

•

Configuring the Virtual Interface

•

Viewing Virtual Interface Statistics

 

4.4.1 Configuring the Virtual Interface

Use the 

Configuration

 screen to view and configure the virtual interface details. 

1. Select 

Network 

>

 

Switch Virtual Interface 

from

 

the main tree menu.

2. Select the 

Configuration 

tab.

The following configuration details display in the table:

Name

Displays the name of the virtual interface.

VLAN ID

Displays the VLAN ID associated with the interface.

DHCP 

Displays whether the DHCP client is enabled or not. A green check mark defines the 
DHCP client as enabled for the interface. A red X means the interface is disabled.

Primary IP Address 

Displays the IP address for the virtual interface.

Summary of Contents for WiNG 4.4























































































































































































































































































































































































































































































































































































































Reviews:

No comments