manualshive.com logo in svg

Motorola WiNG 4.4, Reference Manual, Page: 126 / 598

Share
Download
Motorola WiNG 4.4 Reference Manual Download Page 126

4 - 22 WiNG 4.4 Switch System Reference Guide

4.5 Viewing and Configuring Switch WLANs

A 

wireless LAN

 (WLAN) is a

 local area network

 (LAN) without wires. WLANs transfer data through the air using radio 

frequencies instead of cables. The WLAN screen displays a high-level overview of the WLANs created for the switch 
managed network. Use this data as necessary to the WLANs that are active, their VLAN assignments, updates to a WLAN’s 
description, and their current authentication and encryption scheme.The Wireless LANs screen is partitioned into 5 tabs 
supporting the following configuration activities:

•

Configuring WLANs

•

Viewing WLAN Statistics

•

Configuring WMM

•

Configuring the NAC Inclusion List

•

Configuring the NAC Exclusion List

4.5.1 Configuring WLANs

Refer to the 

Configuration

 screen for a high-level overview of the WLANs created for use within the switch-managed 

network. Use this data as necessary to keep current of active WLANs, their VLAN assignments, updates to a WLAN’s 
description, and their current authentication and encryption schemes. Be careful to properly map BSS WLANs and security 
schemes.

To configure a WLAN:

1. Select 

Network

 

>

 Wireless LANs

 from the main menu tree.

Switch Note: 

The RFS6000 supports a maximum of 32 WLANs. The RFS7000 supports a

maximum of 256 WLANS. RFS4000 supports a maximum of 24 WLANs.

Summary of Contents for WiNG 4.4























































































































































































































































































































































































































































































































































































































Reviews:

No comments