Motorola WiNG 4.4 Page 57 Reference Manual Download

Page: 57 / 598

Switch Web UI Access and Image Upgrades

2 - 9

6. Select the

Special Functions

main menu item.

7. Select the

Firmware Update Menu-[F3]

menu item

8. Select the

Alter Filename(s)/HELP URL/TFTP Server

menu item.

a. Confirm that the Firmware File Name is correct, make changes as needed.

b. Enter the IP address of your TFTP server, select enter.

c. Select F1 to save your changes.

9. Select

Firmware

under the

Use TFTP to update Access Point's

option.

10.Select

yes

when asked to confirm.

11.The AP-4131 will now reset, download and install the desired firmware.

12.Once the firmware download is complete, connect the AP-4131 to the PoE switch and the RF Switch The

AP-4131 should adopt and operate as a “thin” Access Port.

Summary of Contents for WiNG 4.4























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for WiNG 4.4

Reviews:

Related manuals for WiNG 4.4

Brands by name

Popular brands

Motorola WiNG 4.4, Reference Manual

Search results

Summary of Contents for WiNG 4.4

Reviews:

Related manuals for WiNG 4.4

Brands by name

Popular brands