manualshive.com logo in svg

Motorola WiNG 4.4, Reference Manual, Page: 231 / 598

Share
Download
Motorola WiNG 4.4 Reference Manual Download Page 231

Network Setup 4 - 127

4. Selecting a radio from the table will display the following details of individual calls:

Delay to AP

Displays the current delay time for each Access Port.

MUs Associated

Displays the total number of mobile units associated with each Access Port.

Index

Displays the numerical identifier assigned to each MU.

Protocol

Displays which voice protocol is being used for the selected call. Voice protocols include:

• SIP

• TPSEC

• Spectralink

• H.323

Successful Calls

Displays the number of successful calls for the displayed MUs.

Avg Call Quality

R Factor

Displays the average call quality using the R Factor scale. The R Factor method rates voice 
quality on a scale of 0 to 120 with a higher score being better. If the R Factor score is lower 
than 70 it is likely that users will not be satisfied with the voice quality of calls.

Avg Call Quality

MOS-CQ

Displays the average call quality using the Mean Opinion Score (MOS) call quality scale. The 
MOS scale rates call quality on a scale of 1-5 with higher scores being better. If the MOS 
score is lower than 3.5 it is likely that users will not be satisfied with the voice quality of calls.

Average Jitter

(msec)

Displays the average jitter time for calls on the displayed MUs. Jitter is delays on the network 
that can result in a lag in conversations. A jitter score higher than 150ms is likely to be noticed 
by end users during a call.

Average Latency

(msec)

Displays the average latency in milliseconds for calls on the selected MUs.

Summary of Contents for WiNG 4.4























































































































































































































































































































































































































































































































































































































Reviews:

No comments