manualshive.com logo in svg

Motorola WiNG 4.4, Reference Manual, Page: 123 / 598

Share
Download
Motorola WiNG 4.4 Reference Manual Download Page 123

Network Setup 4 - 19

3. Click the 

Details

 button to view packet level statistics of any user-defined interface. For more information, see 

Viewing 

Virtual Interface Statistics on page 4-19

.

4. Click the 

Graph

 button to view a graphical representation of the switch virtual interface statistics. For more 

information, see 

Viewing the Virtual Interface Statistics Graph on page 4-20

.

4.4.2.1 Viewing Virtual Interface Statistics

To view detailed virtual interface statistics: 

1. Select a virtual interface from the 

Statistics

 tab.

2. Click the 

Details 

button.

3. The 

Interface Statistics 

screen displays the following content: 

Packets Out

Displays the number of packets going out on the interface.

Packets Out 
Dropped

Displays the number of dropped packets going out of the interface due to saturated 
output queues assigned to the interface processor or the physical device/software 
module. Packets can be dropped due to collisions as well.

Packets Out Error

Displays the number of error packets going out of the interface including frame forming 
errors or malformed packets transmitted over the interface.

Name

Displays the title of the logical interface selected.

MAC Address

Displays physical address information associated with the interface. This address is read-
only (hard-coded at the factory) and cannot be modified.

Input Bytes

Displays the number of bytes received by the interface.

Input Unicast 
Packets

Displays the number of unicast packets (packets directed towards the interface) received at 
the interface.

Input NonUnicast 
Packets

Displays the number of NonUnicast Packets (Multicast and Broadcast Packets) received at 
the interface.

Input Total Packets

Displays the total number of packets received at the interface.

Summary of Contents for WiNG 4.4























































































































































































































































































































































































































































































































































































































Reviews:

No comments